Double wall Chamber for Sterilizing and Drying Fabrics, Surgical Instruments, Bottle Fluids, Ampoules & Vials
Working Pressure
1.2 kg / cm2 (Gauge pressure) 121 Deg C Can also offer as High Speed Sterilizer for working Temperature 134 Deg C

Construction
Chambers & Lid - 18/8 Stainless Steel
Jacket - Heavy gauge rolled steel
Outer cover - 18/8 Stainless Steel

Unique Drying System
With the help of ejector, can create Partial vacuum upto 10” of Hg. Can also be operated on pre and post vacuum cycle / pulsing

Model and Size
Model Chamber Chamber Electric Dia. Depth. power ASC-168 400mm(16”) 600mm(24”) 6 kw

1. Keep the water inlet valve closed and all other open to avoid air blocks. 2. Fill water through the funnel till the red line mark on gauze glass tube. 3. Close all the valves and put the switch ON. 4. Wait till the pressure gauge (Steam Generator) builds the pressure of 22 lbs. That is 10 Kgs. 5. Load the chamber with your packs or bins. 6. Tighten the lid by slit spanner evenly. 7. Open the eject valve and allow the steam to play in the chamber. 8. Allow the chamber to build up a pressure of 17 lbs & Temp. at 121 deg C. Then close eject valve open the steam outlet valve till the pressure gauge shows 0 lb. Repeat this for two more times. Totally thrice (to pulvarise the air). 9. Adjust the canty lever to your required pressure. 10. Allow the steam to build up to your required pressure. 11. Maintain the pressure for 30 minutes at the set pressure. 12. Close the eject valve. 13. Open the steam out-let valve till the pressure gauge shows 0 lb in the chamber. 14. After showing 0 lb close the steam out-let valve. 15. Wait 10 minutes for the vacuum to build and put the current OFF. 16. Open the steam outlet valve and inlet valve to break the vacuum. 17. Open the lid with slit spanner and place the spanner crosswise between the lid and chamber for 5 to 10 minutes. 18. Open the lid and now the packs are ready for USE.

PRICE IS FOR SINGLE PIECE PLEASE INFORM SIZE YOU REQUIRE BY EMAIL AND NO DRUMS ARE INCLUDED